Home » Commander » Low Pressure pH Sensor
Low Pressure pH Sensor
Low Pressure pH Sensor
Low Pressure pH Sensor – Image 2
Low Pressure pH Sensor
Low Pressure pH Sensor

Low Pressure pH Sensor

This pH sensor is used for low-pressure in-line measurements and handheld measurements. Useful for almost any low-pressure application, it can be used to manually measure samples and even used with a compression fitting to measure samples in-line.

Ordering Information

Looking for a quote or to discuss your needs?

Our global team are on hand to help

Get a Quote

The rugged polymer body of this sensor is thicker than most other polymer models and provides extra protection against accidental impact. In addition, this pH sensor is rugged enough to be used in a media-based environment

Part Number: C2451C-12A-A10BC

Specifications

pH Range: 0-12 pH

Temperature Range: -5° to 80°C

Reference System: Ag/AgCl

Reference Electrolyte: 3.8M KCl, Saturated with AgCl

Glass Membrane Type: GP bulb, Low Sodium Ion error

Membrane Resistance: 100 Megohms

Zero Potential: 7.0 pH

Wetted Materials: Glass, Epoxy, Silicone, and Ceramic

Cap: Fits all Lab Arms

Connector: BNC Plug

Standard cable length: 3 metre (10 ft) low noise cable

Description

  • Combination Polymer body pH electrode, 13 mm diameter
  • Gel Filled & Sealed reference with coaxial & ceramic pin wick
  • Single junction reference design (1X)
  • 3 metre (10 ft) cable, BNC Connector

Additional Notes

Designed for applications where rough handling and breakage are major problems, the body of this electrode is made from impact resistance epoxy tubing. Particularly suited for use with portable pH meters in the field and to make spot check measurements of production processes.

One of the most common problems that growers encounter with pH sensors in agricultural applications is corrosion of the connectors due to moisture. If the connectors get wet, the output of the sensor will be shorted making calibration of the pH sensor impossible. To prevent the sensor from malfunctioning, it is very important to keep the connectors dry in a water-culture system.

Note: All sensors come standard with a 10 foot (3 meter) low noise coaxial cable and either a BNC Plug or a crimped Ferrule connector.

To order a sensor with the fully ferruled connector, simply change BC to FF at the end of any sensor part number.

Broadley-James pH Electrodes for Agricultural Applications are:

Economical

Broadley-James pH electrodes are a cost-effective component of hydroponics systems. Whether pH is measured as part of an in-line nutrient dosing unit or the pH of the hydroponics bays is tested manually, the affordable pH electrode is a vital part of a nutrient management system. Broadley-James pH electrodes can be used with nearly all systems that are available on the market. The company has more than two decades of experience in horticultural pH measurement and control applications.

Long Lasting

Broadley-James pH electrodes are durable and designed for maximum performance. With proper care and maintenance, Broadley-James pH electrodes will continually help maintain optimal growing conditions in hydroponics bays. Accurate measurement of pH is critical to provide precise pH control and dosing of the nutrients to achieve the highest yields. Easy to maintain and exchange when needed, these pH sensors can be quickly replaced to minimize loss in production time.

Compatible

Broadley-James is the most complete source of replacement pH electrodes for hydroponics, and has an extensive selection of pH sensors to fit the most widely used systems. Whether using a conventional housing, the newer twist-lock housing, or measuring pH manually, Broadley-James has pH sensors that are compatible with all brands of electronics and controllers.

If you do not see your style of pH sensor pictured here, call a Broadley James representative today for further assistance.

New Twist-Lock Housing with Sensor installed

C1101A-twist

Conventional Threaded Housing with Sensor installed

C1101A-thread

Produits similaires